Jic An

October 11, 2024 Post a Comment

Jic an

JIC Steps In The majority of the hydraulic population agrees, the JIC (or SAE) 37 degree fittings are generally interchangeable with AN fittings.

What is an An style fitting?

AN fittings are a flare fitting, using 37° flared tubing to form a metal-to-metal seal. They are similar to other 37° flared fittings, such as JIC, which is their industrial variant.

ARE AN and flare the same thing?

AN and JIC Fittings Interchangeability AN 37° flare and industrial 37° flare fittings function identically. In many cases, they appear to be functionally interchangeable, but they are not.

What does JIC mean in hydraulics?

JIC (or Joint Industry Council) fittings, defined by SAE J514, are compression fittings machined with a 37 degree flare seating surface and parallel threads. They are commonly manufactured in nickel alloys, brass, carbon & stainless steel. JIC Fitting hydraulic connections are common in most fluid power systems.

Is JIC 37 or 45?

JIC fittings, defined by the SAE J514 and MIL-DTL-18866 standards, are a type of flare fitting machined with a 37-degree flare seating surface.

Will JIC fit SAE?

SAE and AN/JIC fittings are completely incompatible due to the different flare angle. Furthermore, AN fittings (or those complying with subsequent standards) and JIC fittings are not interchangeable for design-controlled applications due to differing quality standards.

How much psi can an AN line hold?

These hoses handle pressure up to 250 psi and can be used on many different parts the car.

How do you size an AN fitting?

Measure the Outside Diameter (OD) of your pipe or pipe fitting:

Wrap a string around the pipe.
Mark the point where the string touches together.
Use a ruler or measuring tape to find the length between the tip of the string and the mark you made (circumference)
Divide the circumference by 3.14159.

How does an AN fitting work?

This will clamp down on the hose and this clamping force in here will drive the hose spread it out

What degree flare is an?

The U.S. Air Force, with help from Wright Patterson Air Force base, developed a fitting with 37° flare angle, before WWII, which became known as the "AN" fitting.

What is 37 degree flare used for?

Defined by MIL-F-18866 and SAE J514 standards, these flare fittings have been machined to have a 37° flare seating surface. These fittings are most commonly used in fluid power and fuel delivery applications, especially those using high pressure.

What the difference between 37 and 45 degree flare?

JIC 37 degree flare union fittings is in most hydraulic systems in high pressure application such hydraulic excavator, loader and tractor etc. SAE 45 degree flare fittings is used in low to medium pressure applications such as military and aerospace equipment. they doesn't interchangeable into each other.

Is JIC better than NPT?

JIC fittings come with a 37O flare angle, while the NPT fittings rely on just their tapered threads for sealing. As a result, JIC fittings offer better sealing capabilities and can withstand higher working pressures.

What size is #4 JIC?

Inch size	Dash size	Female thread O.D (in)
¹⁄₈	-2	⁹⁄₃₂
³⁄₁₆	-3	¹¹⁄₃₂
¹⁄₄	-4	¹³⁄₃₂
⁵⁄₁₆	-5	¹⁵⁄₃₂

How do I know if my hydraulic fittings are JIC?

In a word,if the fittings has a 37° flare (sealing surface angle)and straight United National Fine straight Threads (UNF) after inspection. It can be identified be JIC fitting.

Are brake lines 37 or 45 degree flares?

The 45-degree inverted flare is the most common style of flare used in automotive hard lines like brake, fuel, and transmission fluid transfer.

Will a 45 degree flare work on a 37 degree fitting?

Note that 37° AN and 45° SAE fittings and tooling are not interchangeable due to the different flaring angles. Mixing them can cause leakage at the flare.

Is there a an fitting?

AN fittings are a particular type of fitting used to connect flexible hoses and fluid-carrying metal tubing together. The name is derived from a standardized joint agreement between the Army and Navy during World War II regarding the size specification of the fitting. A-N, therefore, stands for Army-Navy.

Do JIC fittings need sealant?

Even though JIC threads seal with a metal-to-metal connection, no thread sealant is required to achieve a leak free connection.

Do JIC fittings have O rings?

Most commonly used as hydraulic fittings in the fluid power industry, JIC (Joint Industry Council) fittings are a type of flare fitting machined with straight threads using a 37° flare seating surface. This is used to form the seal of the fitting instead of an o-ring or tapered threads.